Cometech QC-507D3 Universal Material Tester Horizontal Type | 200N, 90°/180° Peel & Friction, 2.8" Touch Screen, ASTM D3330 / D1894 / D1000
- Horizontal-type 200N universal material tester for light-load tape peel tests (90° and 180°), coefficient of friction (COF) measurements, and related applications — designed for plastic, tape, and packaging industries.
- Built-in 2.8-inch touch screen for stand-alone operation (no PC required); real-time force-displacement and force-time curve display; stores up to 10 data entries; Wi-Fi data export supported.
- Adjustable test base height and angle for 90° and 180° peel setups; optional friction measurement accessory available.
- Optional PC software via TCP/IP (RJ45): Windows OS, Chinese/English/Japanese/Korean/Spanish, multi-test simultaneous output, advanced curve settings, data save/recall/compare functions.
Request a quote for this product
Overview
Cometech QC-507D3 is a horizontal-type light-load universal material tester with a max capacity of 200N, designed specifically for tape peel (90° and 180°), coefficient of friction, and related thin-material testing applications.
It features a built-in 2.8-inch capacitive touch screen that allows stand-alone operation without external software — test speeds are digitally set for precision, real-time force-displacement and force-time curves are displayed on-screen, and results can be exported via Wi-Fi.
The machine is powered by a DC motor with a closed-loop driver for servo-motor-like speed precision; it is compatible with all voltage ranges (100–240VAC) for global use, and an optional PC software suite via TCP/IP (RJ45) is available for advanced test reporting.
Test Capabilities
- 90° peel adhesion test
- 180° peel adhesion test
- Coefficient of friction (COF) measurement — optional accessory
- Adjustable test base height and angle for different peel configurations
2.8" Touch Screen (Stand-Alone Mode)
- Basic test method: Peeling
- Memory of test conditions with one-touch test start
- Real-time display of force-displacement and force-time curves
- Metric and imperial units available
- Stroke, force, and time limit protection
- Break-point stop and automatic return
- Stores up to 10 data entries
- Languages: Chinese, English, Japanese
Optional PC Software
- Operating platform: Windows OS
- Languages: Chinese, English, Japanese, Korean, Spanish
- Connection: TCP/IP (RJ45)
- Simultaneous output of multiple test results
- Unit selection: metric and imperial
- Flexible table layout for customized data presentation
- Customizable data naming
- Test screen displays values, graphs, or both simultaneously
- Data processing: save, recall, list, compare, etc.
- Curve settings: Force, Elongation, Displacement, Time, Stress, Strain, etc.
- Software protection: over test stroke, overload, over-time shutdown
Optional Load Cell (D3 System)
| Controller System | Grade A Load Cell | Grade B Load Cell |
|---|---|---|
| D3 | 1–100% ±0.5% | 1–100% ±1% |
| Safe Overload | 140% | 120% |
Load cell built-in chip records specification and calibration parameters — no need to reset or recalibrate after replacement. No limit on load cell replacement numbers.
Standards
- ASTM D1000
- ASTM D3330
- ASTM D1894
Full Specifications
| Model | QC-507D3 |
|---|---|
| Max. capacity | 200N |
| Units | Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short) Pressure: kPa, MPa, psi, bar, mm-Aq, mm-Hg |
| Force resolution | 24 bits |
| Force accuracy | 0.5% / 1% (depending on load cell chosen) |
| Stroke (w/o grip) | 320 mm |
| Stroke resolution | 0.001 mm |
| Speed range | 25–400 mm/min ± 5% |
| PC connection | RJ45 (TCP/IP) — software optional |
| Sampling rate | Max. 50 Hz |
| Motor | DC motor |
| Power | Single phase 100–240 VAC, 3A |
| Dimension | 86 × 34 × 45 cm |
| Weight | 40 kg |
Support materials
- Test video, teaching material, SOP, and test case (availability depends on configuration and region).