Cometech QC-548M2F Universal Testing Machine (2–5 kN) – High‑Speed Computerized Tensile & Compression Tester (Up to 1200 Hz)
QC-548M2F is a tabletop, single‑column universal material testing machine (UTM) up to 5 kN, designed for quiet operation and high‑precision results with advanced controller/software for tensile, compression and peel testing.
- Standards listed: ISO 7500-1, ASTM E4 and multiple regional standards (DIN/JIS/EN/BS/GB).
- M2F performance (series): up to 1200 Hz sampling and up to 0.001–3000 mm/min speed range (model dependent).
- Servo drive + optional standalone display, plus separate electronic control box to reduce signal interference and improve stability.
Request a quote for this product
Overview
The Cometech QC‑548M2F Computerized Tensile (compression) Testing Machine is a single‑column tabletop UTM (max. 5 kN) built to deliver stable, low‑noise testing with high‑speed feedback and flexible control modes for R&D and QC.
Explore more on PTS Lab:
Cometech Tensiles |
Cometech Grips & Fixtures |
Cometech Software & Controllers |
Mechanical testing equipment |
All applications
Cometech states the machine uses a maintenance‑free transmission mechanism and an independent electronic control box to reduce signal interference and improve test stability, which also helps future maintenance and electronic upgrades.
A manual jog function is included to improve positioning and calibration accuracy, and high‑speed feedback helps reduce overload risk; external signals are also supported for additional control modes.
Technical Specification
Standards (as listed by Cometech):
ISO 7500‑1, ASTM E4, ASTM D‑76, DIN 5122, JIS B7721/B7733, EN 1002‑2, BS 1610, GB/T 228.
Official standard pages (outbound):
ISO 7500-1 |
ASTM E4
| Product serial | QC‑548M2F |
|---|---|
| Machine type | Tabletop, single‑column universal testing machine (UTM) |
| Maximum capacity (series) | Up to 5 kN (M2F‑S/M), 2 kN (M2F‑L) |
| Force resolution (series) | 32 bits |
| Test stroke without grips (series) | 400 mm (M2F‑S), 800 mm (M2F‑M), 1100 mm (M2F‑L) |
| Speed range (series) | 0.001–3000.0 mm/min |
| Data sampling rate (series) | 2–1200 Hz |
| Motor (series) | 400 W AC servo motor |
| Dimensions (series) | 50×50×96 cm (S), 50×50×141 cm (M), 50×50×186 cm (L) |
| Weight (series) | 70 kg (S), 80 kg (M), 100 kg (L) |
Features & Functions
- Stand‑alone mode supported via optional display panel for tensile, compression and peeling tests.
- Independent electronic control box reduces interference from transmission components, improving stability and serviceability.
- Manual jog improves positioning and calibration; high‑speed feedback signal helps reduce overload risk.
- Optional anti‑collision function to protect loadcells (noted as series feature).
- Designed for advanced tests including creep, cycle/cyclic testing, load/strain control, foam testing, Poisson’s ratio evaluation and slippage checks (series feature).
- Loadcell automatic reading; Cometech states calibration can be performed without installing the loadcell on the machine (series feature).
Configuration & Options
- Frame options: QC‑548M2F‑S (400 mm stroke), QC‑548M2F‑M (800 mm stroke), QC‑548M2F‑L (1100 mm stroke).
- M2F software: Cometech lists more than 260 software analyses available (series feature).
- Grips/fixtures: Choose grips based on test method (peel, tensile, puncture, compression, bending, etc.).
Documents & Downloads
- Official manufacturer page:
QC‑548M2F – Computerized Tensile (compression) Testing Machine
- Cometech M2F / 5 kN series comparison table (S/M/L) page:
QC‑548M2F series specifications (S/M/L)
- QC‑548M2F brochure (PDF):
QC‑548M2F (2–5 kN) brochure
Applications & Case Studies
- Tensile, compression and peel testing for plastics, rubbers, films, textiles, tapes and packaging materials (with appropriate grips).
- Advanced evaluation such as creep and cyclic testing for material development and durability screening (series feature).
Related PTS Lab products:
QC‑548M1F (M1F series) |
QC‑548 (D2 series overview)
Support & Compatibility
- PC connectivity and software options enable full computerized control and reporting; Cometech also supports external signals for alternative control modes.
- ISO 7500‑1 / ASTM E4 compliance supports force verification and calibration workflows for quality systems.